doorhardware.ca

Schlage BE365 CAM 620 Camelot Keypad Dedbolt Antique Pewter

charlene — Wed, 22 Feb 2012 19:30:49 +0000

The Schlage BE365 Camelot Keypad Deadbolt offers an Innovative Turn Lock feature which allows you to lock & leave without a key. This keypad deadbolt provides the convenience of keyless access that is customizable to fit your security needs. Ideal for front doors, side & back doors, garage and entry doors. Easily replaces most existing deadbolts with a screwdriver in about 30 minutes. No programming required as it is preset with two user codes so it’s ready to use right out of the box.

Installing your BE365 Keypad Deadbol

Schlage Camelot Grip Handle Set With Accent Lever – Aged Bronze

charlene — Wed, 22 Feb 2012 18:01:19 +0000

Camelot Single Cylinder Exterior Entrance Handleset from the F-Series

The distinctive design of the Camelot combines architectural inspired arches with graceful curves. The two-piece design offers flexibility for doors with non-standard hole locations while providing a classic appearance for smaller entranceways.

Handleset Features

Replaces virtually any existing lock
Easy installation: One-person project; no extra hands needed
ANSI Grade 2 with maximum security features
Lifetime finish and mechanical guarantee
Designs and finishes to match any home’s architectural style

Deadbolt Features:

Utilizes the new B-Series deadbolt with increased security and easier installation!
1/2″ of bolt left in housing when bolt is thrown for added kick-in resistance.
Integrated anti-pick shield with Snap & Stay™ self adjusting tension provides added security and simplifies installation
1″ Edge bore door preparation required for larger bolt housing
Zinc bolt has hardened steel pin inside that spins in response to sawing attacks which prevents cutting or sawing
Bolt diameter is 10% larger than typical bolts for maximum kick-in resistance
Adjustable backset with the industry’s only helical design that locks into place with no adjusting during installation
Works for both 2-3/8″ and 2-3/4″ backsets.
ADA compliant thumb turn
Faceplates (Part 12-326): Supplied with 1/4″ Round Corner, Square Corner and Drive-In Faceplates
Strike Plates (Part 10-269): Supplied with a Round Corner Deadbolt Strike (10-116), Square Corner Full Lip Strike Plate (10-026) and Round Corner Full Lip Strike Plate (10-027) with Dimensions of 2-1/4″ x 1-5/8″

Installation Instructions

Schlage Camelot Grip Handle Set With Accent Lever – Matte Black

charlene — Wed, 22 Feb 2012 17:38:27 +0000

Camelot Single Cylinder Exterior Entrance Handleset from the F-Series

Handleset Features

Replaces virtually any existing lock
Easy installation: One-person project; no extra hands needed
ANSI Grade 2 with maximum security features
Lifetime finish and mechanical guarantee
Designs and finishes to match any home’s architectural style

Deadbolt Features:

Utilizes the new B-Series deadbolt with increased security and easier installation!
1/2″ of bolt left in housing when bolt is thrown for added kick-in resistance.
Integrated anti-pick shield with Snap & Stay™ self adjusting tension provides added security and simplifies installation
1″ Edge bore door preparation required for larger bolt housing
Zinc bolt has hardened steel pin inside that spins in response to sawing attacks which prevents cutting or sawing
Bolt diameter is 10% larger than typical bolts for maximum kick-in resistance
Adjustable backset with the industry’s only helical design that locks into place with no adjusting during installation
Works for both 2-3/8″ and 2-3/4″ backsets.
ADA compliant thumb turn
Faceplates (Part 12-326): Supplied with 1/4″ Round Corner, Square Corner and Drive-In Faceplates
Strike Plates (Part 10-269): Supplied with a Round Corner Deadbolt Strike (10-116), Square Corner Full Lip Strike Plate (10-026) and Round Corner Full Lip Strike Plate (10-027) with Dimensions of 2-1/4″ x 1-5/8″

Installation Instructions

Schlage Camelot Grip Handle Set With Accent Lever – Antique Pewter

charlene — Wed, 22 Feb 2012 17:31:15 +0000

Camelot Single Cylinder Exterior Entrance Handleset from the F-Series

Handleset Features

Replaces virtually any existing lock
Easy installation: One-person project; no extra hands needed
ANSI Grade 2 with maximum security features
Lifetime finish and mechanical guarantee
Designs and finishes to match any home’s architectural style

Deadbolt Features:

Utilizes the new B-Series deadbolt with increased security and easier installation!
1/2″ of bolt left in housing when bolt is thrown for added kick-in resistance.
Integrated anti-pick shield with Snap & Stay™ self adjusting tension provides added security and simplifies installation
1″ Edge bore door preparation required for larger bolt housing
Zinc bolt has hardened steel pin inside that spins in response to sawing attacks which prevents cutting or sawing
Bolt diameter is 10% larger than typical bolts for maximum kick-in resistance
Adjustable backset with the industry’s only helical design that locks into place with no adjusting during installation
Works for both 2-3/8″ and 2-3/4″ backsets.
ADA compliant thumb turn
Faceplates (Part 12-326): Supplied with 1/4″ Round Corner, Square Corner and Drive-In Faceplates
Strike Plates (Part 10-269): Supplied with a Round Corner Deadbolt Strike (10-116), Square Corner Full Lip Strike Plate (10-026) and Round Corner Full Lip Strike Plate (10-027) with Dimensions of 2-1/4″ x 1-5/8″

Installation Instructions

Schlage Camelot Grip Handle Set With Accent Lever – Satin Nickel

charlene — Wed, 22 Feb 2012 17:25:26 +0000

Camelot Single Cylinder Exterior Entrance Handleset from the F-Series

Handleset Features

Replaces virtually any existing lock
Easy installation: One-person project; no extra hands needed
ANSI Grade 2 with maximum security features
Lifetime finish and mechanical guarantee
Designs and finishes to match any home’s architectural style

Deadbolt Features:

Utilizes the new B-Series deadbolt with increased security and easier installation!
1/2″ of bolt left in housing when bolt is thrown for added kick-in resistance.
Integrated anti-pick shield with Snap & Stay™ self adjusting tension provides added security and simplifies installation
1″ Edge bore door preparation required for larger bolt housing
Zinc bolt has hardened steel pin inside that spins in response to sawing attacks which prevents cutting or sawing
Bolt diameter is 10% larger than typical bolts for maximum kick-in resistance
Adjustable backset with the industry’s only helical design that locks into place with no adjusting during installation
Works for both 2-3/8″ and 2-3/4″ backsets.
ADA compliant thumb turn
Faceplates (Part 12-326): Supplied with 1/4″ Round Corner, Square Corner and Drive-In Faceplates
Strike Plates (Part 10-269): Supplied with a Round Corner Deadbolt Strike (10-116), Square Corner Full Lip Strike Plate (10-026) and Round Corner Full Lip Strike Plate (10-027) with Dimensions of 2-1/4″ x 1-5/8″

Installation Instructions

Schlage Camelot Grip Handle Set With Accent Lever – Lifetime Polished Brass

charlene — Wed, 22 Feb 2012 17:13:12 +0000

Camelot Single Cylinder Exterior Entrance Handleset from the F-Series

Handleset Features

Replaces virtually any existing lock
Easy installation: One-person project; no extra hands needed
ANSI Grade 2 with maximum security features
Lifetime finish and mechanical guarantee
Designs and finishes to match any home’s architectural style

Deadbolt Features:

Utilizes the new B-Series deadbolt with increased security and easier installation!
1/2″ of bolt left in housing when bolt is thrown for added kick-in resistance.
Integrated anti-pick shield with Snap & Stay™ self adjusting tension provides added security and simplifies installation
1″ Edge bore door preparation required for larger bolt housing
Zinc bolt has hardened steel pin inside that spins in response to sawing attacks which prevents cutting or sawing
Bolt diameter is 10% larger than typical bolts for maximum kick-in resistance
Adjustable backset with the industry’s only helical design that locks into place with no adjusting during installation
Works for both 2-3/8″ and 2-3/4″ backsets.
ADA compliant thumb turn
Faceplates (Part 12-326): Supplied with 1/4″ Round Corner, Square Corner and Drive-In Faceplates
Strike Plates (Part 10-269): Supplied with a Round Corner Deadbolt Strike (10-116), Square Corner Full Lip Strike Plate (10-026) and Round Corner Full Lip Strike Plate (10-027) with Dimensions of 2-1/4″ x 1-5/8″

Installation Instructions

Schlage Accent Lever Passage – Antique Pewter

charlene — Wed, 22 Feb 2012 16:27:49 +0000

Accent Passage Door Lever Set Perfect for Hallways and Closets

The simple elegance of the Accent Series will enhance any room’s warmth and beauty. Schlage Accents levers provide an upgrade in appearance and are sure to enhance any door in your home. Accents’ striking designs and elegant trim provide the finishing touches to complement your projects.

Interior Screws are Exposed
Adjusts to fit all standard door preparations
Easy Installation makes for a One-person project
Materials and construction are high quality for exceptional security
Lifetime finish and mechanical guarantee
Quality finishes coordinate with plumbing and lighting
Reversible Lever allows for use as both right-hand and left-hand levers
Faceplates (Part 16-080): Supplied with 1/4? Round Corner and Drive-In Faceplates
Strike Plates (Part 10-027): Supplied with a Round Strike with Dimensions of 2-1/4? x 1-5/8?

Installation Instructions

Schlage Accent Lever Passage – Aged Bronze

charlene — Wed, 22 Feb 2012 16:19:43 +0000

Accent Passage Door Lever Set Perfect for Hallways and Closets

Interior Screws are Exposed
Adjusts to fit all standard door preparations
Easy Installation makes for a One-person project
Materials and construction are high quality for exceptional security
Lifetime finish and mechanical guarantee
Quality finishes coordinate with plumbing and lighting
Reversible Lever allows for use as both right-hand and left-hand levers
Faceplates (Part 16-080): Supplied with 1/4″ Round Corner and Drive-In Faceplates
Strike Plates (Part 10-027): Supplied with a Round Strike with Dimensions of 2-1/4″ x 1-5/8″

Installation Instructions

Schlage Accent Lever Passage – Matte Black

charlene — Wed, 22 Feb 2012 16:15:10 +0000

Accent Passage Door Lever Set Perfect for Hallways and Closets

Interior Screws are Exposed
Adjusts to fit all standard door preparations
Easy Installation makes for a One-person project
Materials and construction are high quality for exceptional security
Lifetime finish and mechanical guarantee
Quality finishes coordinate with plumbing and lighting
Reversible Lever allows for use as both right-hand and left-hand levers
Faceplates (Part 16-080): Supplied with 1/4″ Round Corner and Drive-In Faceplates
Strike Plates (Part 10-027): Supplied with a Round Strike with Dimensions of 2-1/4″ x 1-5/8″

Installation Instructions

Schlage Accent Lever Passage – Satin Nickel

charlene — Wed, 22 Feb 2012 16:09:57 +0000

Accent Passage Door Lever Set Perfect for Hallways and Closets

Interior Screws are Exposed
Adjusts to fit all standard door preparations
Easy Installation makes for a One-person project
Materials and construction are high quality for exceptional security
Lifetime finish and mechanical guarantee
Quality finishes coordinate with plumbing and lighting
Reversible Lever allows for use as both right-hand and left-hand levers
Faceplates (Part 16-080): Supplied with 1/4″ Round Corner and Drive-In Faceplates
Strike Plates (Part 10-027): Supplied with a Round Strike with Dimensions of 2-1/4″ x 1-5/8″

Installation Instructions